Bölüm "Mühendislik Fakültesi" Araştırma Çıktıları | Web of Science için listeleme
Toplam kayıt 89, listelenen: 41-60
-
Experimental and quantum chemical studies on corrosion inhibition effect of 5,5 diphenyl 2-thiohydantoin on mild steel in HCl solution
(ELSEVİER, 2016)The inhibition efficiency of 5,5 diphenyl 2-thiohydantoin (DPTH) against mild steel (MS) corrosion has been investigated in 0.1 M HCl solution by using electrochemical techniques and quantum chemical calculations. The ... -
Experimental investigation of flow characteristics of corrugated channel flowusing PIV
(YILDIZ TECHNICAL UNIV, 2016)The aim of the study is to determine the flow characteristics of corrugated duct. The whole study has been conducted for Reynolds numbers, Re=4000 and 6000. The corrugated duct geometry was designed for aspect ratios, ... -
Fe-Cu coated nickel mesh usage as cathode catalyst for hydrogen evolution reaction
(ELSEVİER, 2018)Nickel mesh electrodes were used as the working electrode. Iron and copper were electrochemically deposited on the nickel mesh in different amounts. When electrochemical coatings had been carried out, different currents ... -
First and second law evaluation of combined brayton-organic rankine power cycle
(YILDIZ TECHNICAL UNIV., 2020)In the present work, we have conducted thermodynamic analysis of an organic Rankine cycle (ORC) using waste heat from intercooler and regenerator in Brayton cycle with intercooling, reheating, and regeneration (BCIRR). ... -
Flood hydraulic analyses: A case study of Amik Plain, Turkey
(MDPI, 2020)In recent years, significant flood events have occurred in various parts of the world. The most important reasons for these events are global warming and consequent imbalances in climate and rainfall regimes. Many studies ... -
Global stability-based design optimization of truss structures using multiple objectives
(SPRINGER INDIA,, 2013)This paper discusses the effect of global stability on the optimal size and shape of truss structures taking into account of a nonlinear critical load, truss weight and serviceability at the same time. The nonlinear critical ... -
Initial organizational studies on national Spatial Data Infrastructure at government level
(ELSEVIER SCIENCE BV,, 2014)A Spatial Data Infrastructure (SDI) is a coordinated series of agreements on technology standards, institutional arrangements and policies that enable the discovery and use of geospatial information by users for a range ... -
Investigation of nanofluid flow characteristics and wall stress concentration locations in a 3D channel with sharp edge rectangular ribs
(YILDIZ TECHNICAL UNIV, 2017)Flow regimes in various channels can introduce different responses that interact with inside of channel walls. Hence both flow characteristic and its effect on wall surfaces should be investigated, especially for a new ... -
Investigation of noble metal loading CoWZn electrode for HER
(ELSEVİER, 2017)It is important to metal deposition on the electrode surface to increase the electrocatalytic activity of the electrodes. CoWZn coated the graphite rod was used to prepare the cathode electrode. Moreover, then Pt and Ru ... -
Investigation on the behaviour of the functionaly gradient material consisting of boron carbide and aluminum alloy
(INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, 2012)In the current study the effect of different temperatures on the aging behaviour of a functionally gradient material was investigated to observe the variation of hardness with respect to the aging time. To do this, the ... -
Isinvestigation of the center coordinates of a circle with unknown radius using polar measurements
(SELCUK UNIV PRESS., 2020)Circular pools or buildings may be encountered in production of maps for making development plans, in the first facility cadaster and on land. Geodetic measurements may be made on at least three different points of the ... -
Mekanik hasarsız çarpma tekniğiyle domatesin sertliğine göre sınıflandırılması
(ANKARA UNIV,, 2015)Bu çalışmada, mekanik hasarsız çarpma tekniği kullanılarak domatesin sertliklerine göre sınıflandırılması incelenmiştir. Denemelerde Bandita F1 domates çeşidi kullanılmıştır. Düşük çarpma enerjili yanal çarpma aygıtı ... -
Modeling and optimization of face milling process parameters for aisi 4140 steel
(UNIV NORTH, 2018)In this study, the effect of cutting parameters such as the depth of cut, feed rate, cutting speed and the number of inserts on surface roughness were investigated in the milling of the AISI 4140 steel. The optimal control ... -
Modeling of heat transfer coefficient in solar greenhouse type drying systems
(MDPI, 2019)As a sustainable energy source, solar energy is used in many applications. A greenhouse type dryer, which is a food drying system, directly benefits from solar energy. Convective heat transfer coefficient (h(c)) is an ... -
Nane lifi katkılı atık hurma çekirdeğinden üretilen kompozit malzemenin özelliklerinin incelenmesi
(GAZI UNIV,, 2019)Bu çalışmada, tarımsal bir atık olan hurma çekirdeği kullanılarak polimerik kompozit malzeme üretimi gerçekleştirilmiş ve ahşap malzeme olarak kullanımı incelenmiştir. Polimerik bağlayıcı olarak üreformaldehit reçinesi ... -
Non-spatial analysis for the road traffic accidents
(ELSEVIER SCIENCE BV,, 2013)Road traffic accidents are huge health and development problem. The number of the accidents has been increasing in Turkey as in the world. In this study the road traffic accidents in Osmaniye are analysed using chi-square ... -
Novel packing materials for open liquid desiccant system
(ELSEVIER SCIENCE BV, 2016)The objective of this study is to design and test a liquid dehumidification system that can operate with a maximum performance under atmospheric conditions without any mass transfer problems. For this purpose, polycarbonate ... -
Numerical investigation of flow and heat transfer in communicating converging and diverging channels
(Yildiz Technical University, 2018)Fluid flow and heat transfer in communicating converging and diverging channel has been numerically investigated. Channels are assumed to be at constant wall temperature and the flow is assumed to be steady state and ... -
Optimization of Cutting Parameters in Hole Machining Process by Using Multi-objective Taguchi Approach
(GAZI UNIV., 2018)In this study, effects of drilling parameters on the various surface roughness characteristics; arithmetic average roughness (Ra), geometric average roughness (Rq) and average maximum height of the profile (Rz) in the wet ... -
Optimization of geometrically nonlinear lattice girders. Part I: considering member strengths
(VILNIUS GEDIMINAS TECH UNIV., 2015)In this study, the entire weight, joint displacements and load-carrying capacity of tubular lattice girders are simultaneously optimized by a multi-objective optimization algorithm, named Non-dominated Sorting Genetic ...