Esansiyel yağ ilaveli yenilebilir filmlerin gıda sistemine uygulanması

Yükleniyor...
Küçük Resim

Tarih

Yazarlar

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Osmaniye Korkut Ata Üniversitesi

Erişim Hakkı

info:eu-repo/semantics/openAccess

Özet

Bu çalışmanın amacı, farklı bitkilerden (Santolina chamaecyparissus (S), Schinus molle (SM), ve Eucalyptus globulus (E) elde edilen esansiyel yağ ilavesinin (%1, %2 ve %3) karboksimetil selülöz (CMC) bazlı filmlerin fizikokimyasal, mekanik, antioksidan ve antimikrobiyal özellikleri üzerine etkisinin incelenmesidir. Ayrıca, bu filmler tavuk göğüs eti üzerine uygulanmış ve tavuk eti örneklerin fizikokimyasal, mikrobiyolojik ve duyusal özelliklerindeki değişimler araştırılmıştır. S, SM ve E bitkilerinin esansiyel yağ içeriklerinin ana bileşeni sırasıyla Artemisia (%30.61), α-Phellandrene (%23.95) ve 1,8-Cineol (%69.32) olarak bulunmuştur. Test edilen E.coli, P. aeruginosa, S. typhi, B.subtilis, E. fecalis ve S. aureus mikroorganizmalarının üzerinde en yüksek antimikrobiyal aktiviteye sahip olan esansiyel yağlar sırasıyla SM (19.75±0.25 mm), E (16.50±0.05 mm), E (19.50±0.50 mm), S (20.00±5.00 mm), E (19.50±0.5 mm) ve S (17.50±2.50 mm) olarak bulunmuştur. Filmlerin esansiyel yağ içeriğinde %1'den %3'e artış filmlerin kalınlıklarında artışa, nem ve suda çözünürlüklerinde azalmaya, su buharı geçirgenliğinde ise artış ve azalışa neden olmuştur. Esansiyel yağ içeren filmlerin gerilme kuvveti değerleri (29.43±3.28-77.05±0.02 MPa) kontrol filminkinden (24.60±0.54 MPa) daha yüksek saptanırken, kopmada uzama değerleri (%20.08±0.05-%33.01±0.01) kontrolden (%37.06±0.85) daha düşük bulunmuştur. Filmlerin mikroyapıları %1 ve %2 esansiyel yağ içeren filmlerde daha homojen yapıda görülmüştür. Filmlerin antimikrobiyal aktivitelerinde ise inhibisyon zon çapları 2.00±3.46-19.33±1.15 mm arasında ölçülmüştür. Filmlerle kaplanmış tavuk etlerinde 5 gün depolama süresinin sonunda mikrobiyal yükün en yüksek 4 log'a kadar ulaştığı görülmüştür. Sonuç olarak, CMC filmlere esansiyel yağ ilavesiyle antimikrobiyal özellik kazandırılmış ve bu filmlerin farklı gıdalara uygulanma potansiyelinin olduğu görülmüştür.

The aim of this study was to investigate the effect of essential oil addition obtained from different plant (Santolina chamaecyparissus (S), Schinus molle (SM), and Eucalyptus globulus (E) on the physicochemical, mechanic, antioxidant and antimicrobial properties of carboxymethyl cellulose (CMC) based films. Furthermore, these films were applied onto chicken breast meat and the changes in the physicochemical, microbiological and sensory properties of chicken meat samples were studied. The main component of the esssential composition of S, SM ve E plants was found as Artemisia (30.61%), α-Phellandrene (23.95%) ve 1,8-Cineol (69.32%), respectively. The essential oil with the highest antimicrobial activity on tested microorganisms E.coli, P. aeruginosa, S. typhi, B.subtilis, E. fecalis ve S. aureus was determined as SM (19.75±0.25 mm), E (16.50±0.05 mm), E (19.50±0.50 mm), S (20.00±5.00 mm), E (19.50±0.5 mm) and S (17.50±2.50 mm). Although the increase in essential oil content of films from %1 to %3 resulted in the increase in the thickness, decrease in the moisture content and solubility in water of films, it caused both a decrease and an increase in water vapor permeability of films. While the tensile strength values (29.43±3.28-77.05±0.02 MPa) of films containing essential oil was determined higher than the control (24.60±0.54 MPa), the elongation at break values (%20.08±0.05-%33.01±0.01) of films cointaning essential oil were lower than the control (%37.06±0.85). The film microstructures were seen with a better homogenity in the films containing 1% and 2% essential oil. The inhibition zone diameter was measured between 2.00±3.46-19.33±1.15 mm in the antimicrobial activity of films. The microbial load was reached up to 4 log in the chicken meat coated with films after storage time of 5 days. As a result, CMC films gained antimicrobial activity with the addition of essential oils and these films have the potential for applying to different foods.

Açıklama

Fen Bilimleri Enstitüsü, Gıda Mühendisliği Ana Bilim Dalı

Anahtar Kelimeler

Gıda Mühendisliği, Food Engineering

Kaynak

WoS Q Değeri

Scopus Q Değeri

Cilt

Sayı

Künye

Onay

İnceleme

Ekleyen

Referans Veren